Let’s take a look at how to clean the SF type water film desulfurization dust collector bag?
1. Cleaning: Use high-frequency vibration to clean the relatively large dust that enters the bag wall of the SF type water film desulfurization dust collector as much as possible without affecting the entanglement fastness of the fibers and maintaining good peeling resistance of the bag.
2. Chemical experiment treatment: extract bag samples, use instruments to detect the oil content of the bag, and select appropriate washing raw materials to clean the bag without causing damage to the bag.
3. Cleaning: Select suitable washing raw materials and strictly proportion them, clean with low-temperature water, have uniform water flow, moderate intensity, and no mechanical damage to the bag.
4. Drying: Use hot air drying at about 110°C to maintain the dimensional stability of the SF type water film desulfurization dust collector bag. The bag will not deform or shrink after drying.
5. Repair: Repair damaged bags such as abrasion and holes caused by use to ensure a high recycling rate.
6. Testing: Use instruments to test the physical indicators of the cleaned bags to ensure that the cleaning quality meets the requirements.
Please indicate the source when reprinting:http://www.cngrjx.com/