How to ensure the normal operation of single-stage gas generator
A single-stage gasifier is a device that uses coal or coke as raw material, air and water vapor as gasification agents, and performs oxidation and reduction reactions in a fixed bed to produce mixed gas. It is used in various types of gas-fired industrial kilns or to replace original coal-fired industrial kilns in metallurgy, machinery, chemical industry, building materials, refractory materials, ceramics and other industries. Such as heating, baking, annealing, drying, heat treatment, melting and push plate, roller table, inverted flame and other kilns.
Like other devices, certain conditions need to be met to function properly. The following is an introduction to the conditions under which a normal-pressure fixed bed section gasifier that uses a mixture of water vapor and air as the gasifying agent can operate normally?
For the normal operation of the equipment, first of all, it is necessary to ensure that the entire equipment is in good condition. Secondly, the boiler workers and the fitters on duty should carefully maintain the operating equipment, lubricate it reasonably, clean or replace easily damaged parts on time, and meet the four requirements. The boiler operator operates and adjusts the equipment in accordance with regulations and strictly controls the main gasification parameters. If abnormal parameters or abnormal levels are found, corresponding measures should be taken in a timely manner to deal with them. The boiler personnel should carefully record the instructions for the parameters of each part of the single-stage gas generator, detect factors such as the temperature in the furnace, the gas composition, and the carbon content of the ash based on the level, conduct comprehensive analysis, and make reasonable corrections.
|
