煤气发生炉的专业生产厂家,提供多种煤气发生炉结构图,用煤标准及价格
 
 
  gas generator
 
  Single stage gas generator
 
  Two-stage gas generator
 
  Coal-to-gas furnace for mixing station
 
  Biomass gasifier
 
  LZD type electrostatic purification and recovery device
 
  SF type water film desulfurization dust collector
 
 
 
 
Biomass gasifier
 
Structure and principle:
       Biomass gasification refers to the biomass gasification raw materials (such as straw, wood chips, rice husks, etc.) that are pressed and formed or processed by simple crushing and drying, and then sent to the gasification furnace for gasification and cracking under oxygen-deficient conditions. That is, under certain thermodynamic conditions, with the help of part of the air (or oxygen), water The action of steam causes biomass polymers to undergo pyrolysis, oxidation, reduction, and reforming reactions. The tar associated with pyrolysis is further thermally cracked or catalytically cracked into small molecular hydrocarbons, and flammable gases containing CO, H2, and CH4 are obtained and purified to obtain product gases.
       Biomass gas is an environmentally friendly and clean gas fuel with good combustion characteristics and high burnout rate. The gas itself contains low nitrogen and sulfur content, and can meet environmental protection requirements without taking any other desulfurization and denitrification measures.
       Unpurified biomass gas fuel can be directly transported through pipelines and applied to industrial kilns with lower fuel quality requirements such as steel-rolling heating furnaces, copper-smelting reverberatory furnaces, crucible boilers, industrial boilers, cement rotary furnaces, and refractory tunnel kilns. After purification processes such as dust removal and coking, its application scope can be extended to industrial kilns with higher fuel quality requirements such as ceramic kilns, glass kilns, hot blast furnaces, and power plants.
 
Technical parameters:
model UFBG
200
UFBG
400
UFBG
500
UFBG
600
UFBG
800
UFBG
1000
UFBG
1200
UFBG
1500
UFBG
2000
Gasifier type Fixed bed gasifier
Biomass moisture requirements ≤20% (wet basis)
Biomass size requirements 10~70mm
Biomass consumption
(kg/h)
300~360 600~720 750~900 900~1080 1200~1440 1500~1800 1800~2160 2250~2700 3000~3600
Gas production
(Nm3/h)
600~720 1200~1400 1500~1800 1800~2160 2400~2880 3000~3600 3600~4220 4450~5400 6000~7200
Gasifier heat
(10,000 kcal/h)
70~100 140~190 180~250 220~300 290~400 360~500 440~590 530~650 720~1000
Ash discharge type wet ash (dry ash optional)
Hot gas outlet temperature 100~200℃
Hot gas outlet temperature <40℃
Gas heat 1200~1400Kcal/Nm3
Gas composition CO-16~21%   CO2-5~11%  CH4-4~6%  H2-10~18%  N2-54~60%