Wuxi Guorong Machinery Manufacturing Co., Ltd. specializes in the production of gas generators, LZD electrostatic purification and recovery devices, flue gas dust removal devices, and flue gas desulfurization devices. How to safely produce the aluminum melting furnace supporting the gas generator? During the production of gas generators, workers should pay attention to the drum pressure and control the drum pressure below 294KPa. Adjust the safety valve during the first production and replenish water in the steam drum. The normal water level is 1/3 to 2/3 of the glass tube to prevent overfilling and no water. Regularly discharge sewage once per shift. And you should always pay attention to the furnace outlet temperature and pressure to keep the outlet gas pressure stable. When the user uses a large amount of gas, the furnace outlet pressure will decrease. Open the air pipe valve immediately and check whether there is a fire in the furnace, whether the material layer is too thin, etc. Check every two hours whether the water seal at the bottom of the furnace is overflowing and whether the water level in the ash pan has dropped.