Although most of the time, gas is not used much, gas generators are also used when gas is needed. This device can not only produce gas, but other gases can also be produced through it. We can also achieve gas replacement inside the device. But for stability. During the gas replacement process, we hope that everyone will follow the following requirements:
1. Before replacing the gas station, the steam valve and the relief valve should be checked to open flexibly and close tightly after inspection.
2. Before replacing the gas station, check whether the pipeline grounding is reliable.
3. Before replacing the gas in the gas generator, fire extinguishing equipment should be prepared.
4. Do not operate during heavy rain or thunderstorms.
       5、gas generatorDuring gas replacement, there should be no open flame heat source around the diffuser tube. No one can walk on the gas pipes.
6. During replacement, no hot work is allowed within 30 meters downwind of the radiator pipe.
7. Do not knock the pipes when replacing the gas station.
Before replacing the gas in the gas generator, prepare the corresponding fire-fighting tools so that you can deal with it in case of danger. Observed during the replacement process and found abnormality and stopped for inspection. In addition, it is strictly forbidden to store flammable materials around, because accidents may occur when gas encounters open flames. In short, I hope everyone can use it smoothly under the premise of stability. To avoid gas leakage. Pay attention to ventilation.