Introduction to the two-stage gas generator ignition device and steam generation system.
The control system of the two-stage gas generator dispersion ignition device adopts PLC control, which can be manually and automatically switched according to the actual situation. When the regulating valve opens, ignition begins, and ignition will be successful after about 3 to 5 seconds. When the temperature rises, the flame detection device can detect the flame and output a successful ignition signal. When the regulating valve is closed, the purge valve is opened and a large amount of nitrogen is introduced into the pipeline to replace the remaining gas and ensure safety. When the diffuse ignition device is in normal use, it can be switched to automatic operation mode without personnel on duty. If certain circumstances arise, you can switch to manual mode.
Steam generation system of two-stage gas generator:
The steam generation system mainly refers to the water jacket and the steam collecting drum connected to it. Accidents in this system are usually more serious than low-pressure steam boiler accidents and are often accompanied by casualties. At present, many gas stationsTwo-stage gas generatorThe safety awareness of the steam generation system is not strong. There are common problems such as irregular water use in the water jacket and no automatic facilities for adding water to the steam drum, which poses serious safety risks. Strict supervision of the steam generation system can prevent safety accidents in the system by referring to the relevant specifications for the design, manufacture and management of steam boilers.