The single-stage gas generator conversion principle is a device that uses coal as raw material to produce gas for use in gas equipment. Solid raw coal is added from the top of the furnace and moves downward with the operation of the furnace. While meeting the gasification agent (air, steam) entering from the bottom of the furnace in counter-current, it is heated by the high-temperature gas of the fuel layer at the bottom of the furnace, causing physical and chemical reactions to produce crude coal gas. This crude gas (i.e. hot gas) can be directly used by combustion equipment after coarse dust removal.

       Single stage gas generatorPollutant emissions are lower than traditional coal combustion. The traditional coal burning method and traditional coal utilization process will produce a large amount of pollutants, causing serious environmental pollution. Traditional coal burning makes it difficult to control the temperature of the kiln. It often happens that the temperature cannot be raised or lowered.

Single-stage gas generators use cold gas and hot gas to heat products. For example, to adjust the kiln temperature, you only need to adjust the opening of the gas valve and air valve. It is very simple and has obvious effects on increasing product quality, improving product production technology, improving working conditions and environmental sanitation.