gas generatorIt relaxes the use of coal types and reduces production costs, so it is widely used in energy-saving and environmentally friendly technological transformations in the fields of gas heat treatment heating furnaces, gas forging furnaces, gas crucible furnaces, gas mold shell roasting furnaces, gas bag baking furnaces, gas resin sand thermal regeneration furnaces, gas glass melting furnaces, gas ceramic firing furnaces, and gas refractory inverted smoke kilns, tunnel kilns and other fields. It is this advantage of wide application that enables our company to vigorously develop environmentally friendly gas generators and low-power gas generators without changing the original equipment route, and achieve impressive sales.

How to control it wellgas generatorMany operators often do not have the ability to inspect the temperature. Some people say that when the temperature is high, they will suppress the fire. Some people say that when the temperature is high, they will release ashes to pull down the fire layer and the temperature will drop. In fact, these statements have a misunderstanding, which is that they ignore the key saturation temperature in gasification. The reason why the saturation temperature plays an important role in dealing with uneven inspection temperatures is because what happens when one or two inspection temperatures are too high is what we call a partial furnace. When detecting edge fires, a bent drill must be used to detect the fire. The position of the flame detector is difficult to control during the fire detection process.

For gas generators, inspection temperature and fire detection should be used as operating parameters at the same time. Do not simply use one aspect to define the quality of the furnace. A normal fire detection layer can only prove that the middle combustion of a single-stage gas generator is good. Only when the inspection temperature is within the normal range can the entire furnace be considered normal. How to distinguish whether the inspection is normal or not depends on the inspection temperature. The normal inspection temperature is between 320-500 degrees, and some places also stipulate that the temperature is between 350-650. We think it is best to control it between 320-500. Control the six-way inspection within the range of 80 degrees. If the auxiliary fire detection is normal, the gas furnace is considered to be operating normally.