Coal gas is increasingly becoming a necessity in people's lives and is always used for daily cooking. However, its preparation process requires the reaction of coal and water vapor to produce carbon monoxide and hydrogen. However, the gas after the reaction is often mixed with excess water vapor, which makes the gas impure and affects the use effect. In severe cases, the gas cannot be ignited. For this reason, we propose a high-efficiency separation gas generator.

       The high-efficiency separation gas generator includes a combustion furnace. A slag outlet is set below the combustion furnace. A slag filter is welded at the connection between the slag outlet and the combustion furnace. A feed port is set on the left side of the burner. The feed port is connected to the inner wall of the burner through a feed pipe. A water storage tank is welded on the outer ring of the burner through a connecting column. A water inlet pipe is welded on the right side of the water storage tank. The top of the burner is connected to the gas pipe. A steam removal device is installed in the middle of the gas pipe. A sealing cover is installed on the upper end of the steam removal device.

       The gas generator http://www.cngrjx.com is equipped with a three-layer coal combustion support network to increase the contact area between coal and water vapor, so that the coal and water vapor entering the furnace body can fully react. The reacted gas is filtered by the steam removal device to filter excess water vapor, and then sent out through the gas outlet pipe to ensure the dryness of the gas and make it easier to burn. A slag filter is installed above the slag outlet to prevent unburned coal from entering the slag outlet, saving resources and facilitating promotion and popularization.