The gas generator http://www.cngrjx.com is an advanced equipment that uses air and water vapor as gasification agents to produce mixed gas. It is a process of making coal into gas. Today Bowei Machinery shares with you the specific steps for gas supply of gas generator equipment.

 1. Open the disc valve to keep it unobstructed, adjust the relief valve according to the furnace outlet pressure to maintain normal furnace outlet pressure, take samples from the intercooler and pass the test, and proceed to the next step.

 2. Unlock the water seal at the outlet of the upper furnace, perform purging, take samples and test them if they are qualified, and close the discharge pipe.

 3. Release the water seal of the first catcher isolator, purge the first catcher and the horizontal pipe after the first catcher, take samples from the first catcher release pipe for testing, and close the first catcher release and cross pipe release after passing the test.

 4. Open the large gate valve in front of the intercooler used, take samples from the second capture and release pipe for testing, and send electricity to the first capture when the oxygen is <0.5%.

 5. Open the outlet valve of the intercooler at 1/2 position, close the intercooler vent, open the second catcher outlet valve, close the second catcher vent at the same time, let the low-pressure main pipe vent for 5 minutes, and close the horizontal pipe relief pipe after the second catcher.

 6. Purge the press according to purging procedures.

 7. Release the low-pressure water seal, open the outlet valve, take the sample and test it if it passes the test, close the low-pressure main pipe to drain, and send power to the second capture.

 8. Notify the user, start the pressurizer, the gas will be released from the high-pressure main pipe, and if the sampling test is qualified, it will enter the next process.

 9. Open the discharge pipe at the end of the user, and if the sampling test is qualified, the user can ignite.