gas generatorIt is assembled from many large and small parts. Generally, the manufacturer transports the equipment components to the customer's site for installation, debugging and ignition. After the installation and debugging of the gas station is completed, the initial ignition operation can be carried out, but preparations need to be made before starting the furnace. The editor below will explain to you the preparations that need to be done before starting the gas generator.
       The preparation work before opening the gas station should include: all station equipment and pipelines should be in good condition; all ancillary equipment should be in good condition; personnel should be complete; necessary rules and regulations and record forms should be in place. The entire plant must check the supply of kinetic energy, including electricity, tap water, softened water, steam, etc.; whether raw materials and ash can be transported; whether user conditions are complete, etc. After meeting the above conditions, you may consider opening the gas generator.