Excessive oxygen content in the gas generator is dangerous. When the oxygen content reaches a corresponding level, there may be a risk of explosion. The editor will help you understand the reasons why the oxygen content in the gas generator is too high. Introduction to generator furnace manufacturers:
1. Reasons why the oxygen in the gas generator is too high: there is fire, slagging, wind tunnel or hot operation in the furnace, the saturation temperature is too small, the material layer is too thin, and the reaction is insufficient.
2. Reasons for excessively high carbon dioxide in the furnace: the furnace outlet temperature is too high, cold operation occurs in the furnace, the saturation temperature is used too high, or the ash layer is low and the material layer is thin.
       3、gas generatorReasons for the high carbon content of ash and slag: the saturation temperature is too high, the temperature of the oxide layer is low, the furnace is in cold operation, the coal cannot be gasified, and the carbon content of the slag is high, partial furnace occurs, excessive ash production makes the ash layer too low, the load of the furnace is greater than the specified gas production, etc., all lead to high carbon content of ash and slag.