The heat exchanger device of the gas generator adopts high-pressure jet radiation mode to fully recover the hot gas from the flue. The recovery temperature of the heat exchanger reaches 300-500 degrees, and the energy saving efficiency reaches 10%-25%. It uses untreated coal gas as fuel, and uses the high-pressure jet radiation heat exchanger to generate high-pressure hot gas with a temperature of 300-500 degrees, and ejects it in a multi-stream spiral direction.

The high-pressure hot gas is fully mixed with the coal gas, so that it is evenly mixed with the air. The fire has strong spraying ability, and it is easy to obtain a uniform high-temperature combustion zone, realize the heating of steel, enhance the heating quality, and save energy loss.

       gas generatorHazards of skewed operation: The equipment is skewed in layers, which can easily cause local fires and burn-through in the furnace, resulting in an increase in carbon dioxide content in the gas, a decrease in carbon monoxide content, a passive situation of increased oxygen content, and an increase in the carbon content in the ash. Use an iron drill to make the material layer tight in bright places and places with violent burning holes, and use an iron drill to disperse the surrounding unburned coal to the burned-through area. Add appropriate materials to cover according to the situation to keep the material layer uniform.

The above are the measures that can be taken after the gas generator is deflected.